 |
Capacity |
| |
Standard
Center height 10” -250 mm |
Optional
Center height 12” -300 mm |
| Center height |
10” -250 mm |
12” -300 mm |
| Swing over bed |
19” -480 mm |
23” -580 mm |
| Swing over Cross slide |
11” -280 mm |
15” -380 mm |
| Swing in gape |
31” -790 mm |
35” -890 mm |
|
|
| |
|
Bed |
| Bed Lengh |
Admit Between Center |
| HD-1 (5 '-’6” - 1675 mm) |
22” - 555 mm |
| HD-2 (7’ -0” - 2135mm) |
39” -1000 mm |
| HD-3 (9 - ’0” - 2745 mm) |
64” -1625 mm |
| HD-4 (10’ -0” - 3050 mm) |
76” -1930 mm |
| HD-5 (12' -’0” - 3660 mm) |
100” -2540 mm |
| HD-6 (14’ -0” - 4270 mm) |
124” -3150 mm |
| Bed type |
2V & 2 Flat |
| Bed width |
12.3/4” -325 mm |
| Lenght of gape in front of face plate |
8”- 200 mm |
|
|
| |
|
Head Stock |
| Number of spindle speed |
8 |
| Range of spindle speed |
30 to 490 RPM |
| Spindle nose dia. |
3” -76 mm |
| Spindle bore |
2.1/8” -52 mm |
| Spindle threads |
6 TPI |
Spindle morse taper (Inside)
|
MT - 4 |
|
|
| |
|
Carriage & Compound |
| Cross Slide Dimension |
8” -200 mm x 18” -455 mm |
| Cross slide travel |
10” -250 mm |
| Compound slide dimension |
10” -250 mm x 4.3/4” -120 mm |
| Compound slide travel |
6” -150 mm |
| Tool post square |
4.3/4” -120 mm |
| Tool shank section |
1” -25 mm x 1” -25 mm |
|
|
| |
|
Tail Stock |
| Spindle ram diameter |
2.3/4” -70 mm |
| Spindle ram travel |
8”-200 mm |
| Spindle ram morse taper |
MT -4 |
|
|
| |
|
Threads |
| Number of threads range in metric |
13 |
| Number of threads range in inch |
19 |
| Number of pitch range in metric |
1 to 6 PITCH |
| Number of pitch range in inch |
2 to 24 TPI |
| Lead screw diameter |
1.1/2” -38 mm |
| Lead screw threads |
4 TPI |
|
|
| |
|
Special Features |
 |
Flame hardened bed ways. |
|
Bed is made from high quality cast iron & strictly inspected with microlevel & straight edge. |
|
Head stock spindle is made from high tensile steel duly hardened & ground. |
|
Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds. |
|
Tail stock spindle is hardened & ground, made from alloy steel. |
|
Meticulous care is taken in selecting the right raw material for every component. |
|
Each & every component is passed through strict quality control. |
|
Machine accuracy is tested as per IS : 1878 (Part - I) 1971. |
|
| |
|
Standard Accessories |
| Chuck back plate, tool post spanner, Centre adapter, Dead centres - 2 nos, Motor Pulley, Change gear set. |
|
| |
|
Optional Accessories |
Face plate, Steady rest, Follow rest, Carrier plate, Full or Semi Norton gear box, Rear tool post, Coolant pump with tank & fittings, Taper turning attachment, Machine lamp, Electric Motor, R/f Switch, Motor Vee Belt, Dog chuck, True chuck, Spindle bore (3.1/8” -80mm, 4.1/8” -100mm) |
|
| |
|
Electrical |
| Motor Recommended 3 H.P. / 2.25 KW |
|
| |
|
Colour Option |
| Green / Grey / Blue (Double Tone Colour at Extra Cost) |
|
| |
|
General Specification |
| Model |
Machine Weight (Approx) Kgs. |
Floor Space (Approx) L x W x H (mm) |
| HD-1 |
1200 kgs. |
2000 x 1070 x 1450 |
| HD-2 |
1350 kgs. |
2450 x 1070 x 1450 |
| HD-3 |
1450 kgs. |
3000 x 1070 x 1450 |
| HD-4 |
1600 kgs. |
3450 x 1070 x 1450 |
| HD-5 |
1800 kgs. |
4100 x 1070 x 1450 |
| HD-6 |
2200 kgs. |
4750 x 1070 x 1450 |
|
|
| |
