We fabricate an exquisite range of
link motion presses that are fabricated using qualitative range of steel, aluminum, iron and other material. These machines are offered in
two models.
They are:
- VXL Series - 'C' Frame Construction up to 250 Tons
- XCL Series - 'H' Frame Construction up to 2000 Tons
Available in the leading industrial price these presses are widely in demand owing to the following factors:
- Easy operation
- Lesser cost of maintenance
- Solid body
- Corrosion free
- Longer functional life
The solid straight sided structure avoids deformation and is the ideal frame for presswork. Deformation is the main cause of shortening of die life.
The HLX solid frame press eliminates deformation, and will reduce die maintenance costs by about 50% HLX provides stability and precision even in OFF CENTER presswork, leading to high press performance and longer DIE RUNS.
Reduced die regrinds between runs will save substantial costs.
LINK STRUCTURE
In addition to increased productivity, addittional benifits gained from this press includes : extended die life (via reduced heat Build up).
- Slower and more consistent slide velocity duting the
drawing operation.
- Momentary dwell at the bottom of the press stroke for
metal flow.
- Less snap- through shock.
- Tighter forming tolerances with minimal spring back.
- Lower operating noise levels.
- Increased life of cam die punches and decreased die
cushion maintenance (due to reduced shock loads).
- Ability to work with aluminum, high strength steel and low
cost steel.
Type
|
S1 5SE
|
S2 5SE
|
S5 SE
|
S10 SE
|
S20 SE
|
S30 SE
|
S40 SE
|
CAP IN TONNES
|
1.5
|
2.5
|
5
|
10
|
20
|
30
|
40
|
Bed to Ram Bottom (mm)
|
130
|
180
|
210
|
255
|
320
|
380
|
400
|
Bed Size (mm)
|
300X150
|
350X200
|
400X250
|
450X300
|
550X350
|
600X400
|
650X450
|
Stroke Length (mm)
|
25
|
32
|
50
|
65
|
75
|
90
|
100
|
Hole in Ram for Die Clamping (mm)
|
19
|
22
|
25
|
28
|
32
|
36
|
36
|
Floor to top of Bed (mm)
|
450
|
500
|
550
|
650
|
700
|
700
|
700
|
Optional accessories
- Slide counter balance
- Die Cushion
- Automatic lubrication System
- Special electric controls for Pneumatic clutch
- Bar Ejector System in Slide
- Roll feed, Coil cradle, Scrap cutting, etc.
- Non repeat stroke mechanism (for Mechanical rolling key clutch)
- Fly Wheel Guard
- Pneumatic feed units with decoiler and straightening unit for auto feed line.
- Bolster to suit individual requirement
For Further Inquiry This Product E-mail Us
